3. Things to notify your working
area(Rope, warning signs)
4. Whistle(for collaboration or
emergency)
5. Hatchet or saw (for removal of
obstacles)
c. Never use the product when
wearing pants with loose cuffs, when
wearing sandals, or when barefoot.
4.SAFETY PRECAUTIONS
WARNINGCONSIDERING
a. The engine of this product is designed
to run on a mixed fuel which contains
highly flammable gasoline. Never store
cans of fuel or refill the fuel tank in any
place where there is a boiler, stove, wood
fire, electrical sparks, welding sparks, or
any other source of heat or fire which
might ignite the fuel.
b. Smoking while operating the product
or refilling its fuel tank is extremely
dangerous. Always be sure to keep lit
cigarettes away from the product at
all times.
c. When refilling the tank always turn
off the engine first and take a careful
look around to make sure that there
are no sparks or open flames
anywhere nearby before refueling.
d. If any fuel spillage occurs during
refueling, use a dry rag to wipe up
spills before turning the engine back
on again.
e. After refueling, screw the fuel cap
back tightly onto the fuel tank and
then carry the product to a spot 3m or
more away from where it was refueled
before turning on the engine.
BEFORE STARTING ENGINE
Check working place, the cutting
object and cutting direction. If there is
obstacle, remove it.
Never start cutting until you have a
clear work area, secure footing and a
planned retreat path from the falling tree.
Use caution and keep bystanders and
animals out of the working area whose
diameter is 2.5 times of the cutting object.
Inspect the machine for worn, loose,
or damaged parts. Never operate the
machine that is damaged, improperly
adjusted, or is no completely and
securely assembled. Make sure that
the saw chain stops moving when the
throttle control trigger is released.
WHEN STARTING THE ENGINE
Always hold the machine firmly
with both hands when the engine
is running.
Use all parts of your body away
from the machine when the
engine is running.
Before starting the engine, make
sure the saw chain is not
contacting anything.
OPERATION
Keep the handles dry, clean and
free of oil fuel mixture.
Never touch the muffler, spark
plug or other metallic parts of the
engine while the engine is in
operation or immediately after
stopping the engine. Doing so
could result in serious burns or
electrical shock.
Use extreme caution when cutting
small size brush and saplings
because slender material may
catch the saw chain and be
To Next Page
Loading...