Gaspardo PI - User Manual

PI
Cod. 19500952 09. 99
IT
GB
DE
FR
ES
USO E MANUTENZIONE
USE AND MAINTENANCE
GEBRAUCH UND WARTUNG
EMPLOI ET ENTRETIEN
EMPLEO Y MANTENIMIENTO
g
g

Summary

1.0 Introduction

1.1 Description of the Seeder

Describes the agricultural equipment, its use with tractors, and suitability for various seeds.

1.2 Guarantee

1.2.1 Expiry of Guarantee

Details conditions under which the guarantee expires.

1.3 Identification

1.4 Technical Data

1.5 Handling

1.6 Overall Drawing

1.7 Safety and Indicator Signals

1.8 Position of Warning Signs

2.0 Safety Regulations and Accident Prevention

2.0 General Norms

Provides general safety rules to follow when operating the machine.

3.0 Rules of Use

3.1 Attachment to the Tractor

Instructions for attaching the seeder to the tractor.

P.1.1 Hooking

Details the process of hitching the seeder to the tractor's three-point hitch.

P.1.2 Adapting the Cardan Shaft

Instructions for adapting the cardan shaft to the correct length.

P.1.PSGancio della Semiratrice dalla Trattrice

Steps for safely detaching the seeder from the tractor.

3.2 Seed Distribution

P.2.1 Doser

Explanation of the seed distributor (doser) and its components.

P.2.2 Doser Adjustment and Test

Guide to adjusting the doser and performing a seeding test.

3.3 Preparations for Sowing

P.P.1 Adjusting the Seeding Depth

Instructions on how to adjust the seed depth for optimal germination.

P.P.2 Row Marker Disk Adjustment

How to adjust the row marker disks for accurate line tracing.

P.P.Row Marking Arm Length

Formula and guide for setting the correct row marker arm length.

P.P.4 Seed Level in the Hopper

How to check and monitor the seed level in the hopper.

P.P.5 Hoe Adjustment

Instructions for adjusting the hoe (trace-breaking teeth) position and depth.

P.P.6 Rear Spring Harrow

How to adjust the working depth and spring tension of the rear harrow.

3.4 Before Starting Work

P.4.1 Power Take-Off RPM

Importance of maintaining correct PTO RPM for blower and distribution.

3.5 Operation Start

3.6 During Work

4.0 Control Instruments

5.0 Maintenance

5.0.1 When the Machine is New

Initial checks after the first hours of operation.

5.0.2 At the Beginning of the Seeding Season

Preparatory steps for the seeding season.

5.0.3 Every 20;30 Working Hours

Maintenance tasks to perform every 20/30 working hours.

5.0.4 Every 50 Working Hours

Maintenance tasks to perform every 50 working hours.

5.0.5 Every Six Months

Maintenance tasks to perform every six months.

5.0.6 Emptying the Hopper

Procedure for emptying the seed hopper.

5.0.7 Setting Aside

Instructions for storing the machine at the end of the season.

5.1 Suggestions in Case of Inconveniences

5.1.1 Clogging of the Pipes

Troubleshooting steps for clogged seed pipes.

5.1.2 The Amount of Seed in Kg;Ha Does Not Correspond to Rotation Test Values

Troubleshooting for incorrect seed quantity distribution.

5.2 Supply

6.0 Spare Parts

Gaspardo PI Specifications

General

Brand	Gaspardo
Model	PI
Category	Farm Equipment
Language	English