70
2 CUP Duration Programming
Press MENU button until SHOT VOL
icon flashes and 2 CUP is displayed on
the LCD screen.
Press 2 CUP button to start water flow
from the group head.
Press 2 CUP again once required extrac-
tion duration has been reached.
The machine will beep twice to indicate
the new 2 CUP duration has been set.
NOTE:
1 & 2 cup volumes use duration to
control espresso volume as default set-
ting. Access the Advanced Menu if
you wish to use Volumetric controls for
these volumes.
Shot volume
1 CUP Volume Programming
Press MENU button until SHOT VOL icon
flashes and 1 CUP is displayed on the
LCD screen.
Press 1 CUP button to start espresso
extraction. Press 1 CUP again once
desired volume of espresso has been
extracted.
The machine will beep twice to indicate
the new 1 CUP volume has been set.
2 CUP Volume Programming
Press MENU button until SHOT VOL icon
flashes and 2 CUP is displayed on the
LCD screen.
Press 2 CUP button to start espresso
extraction. Press 2 CUP again once
desired volume of espresso has been
extracted. The machine will beep twice
to indicate the new 2 CUP volume has
been set.
Extraction temperature
Press MENU button until SHOT TEMP
icon flashes. The LCD will display the
current shot temperature setting.
Press UP or DOWN arrow to adjust
SHOT TEMP to the desired setting (ran-
ge 86°C- 96°C).
To Next Page
Loading...
Need help?
General
