73
Advanced Menue
To access the Advanced Menu:
With machine OFF, press and hold the
1 CUP button, then press the POWER
button.
POWER
POWER
TURN
POWER OFF
THEN PRESS
& HOLD
Resetting default settings
The machine has the following
default settings:
1. Temperature – 93°C
2. Pre-Infusion – Duration Pr07
3. Pre-Infusion – Power PP60
4. Steam temperature - 135°C
5. Machine Audio - LO
6. CLEAN ME! alert - OFF
7. Auto Start - OFF
8. Auto Start Time - 7.00am
9. Audio - LO
10. Water Hardness - 3
11. Espresso Volume durations –
30/30 secs
To reset machine to original default set-
tings, first enter Advanced Menu. rSET
will be displayed on the LCD. Press the
MENU button to reset the machine to the
default settings. The machine will beep
3 times to confirm.
The machine will then prompt you to set
the water hardness. Select your water
hardness using the UP & DOWN arrows
& press MENU to confirm or press EXIT
to return to STANDBY mode.
Descale (dESC)
Use this function to access the step by
step de-scale procedure.
Step 1 – Prepare for De-scale
a) Turn Machine off and allow to cool
for 1 hour.
b) Remove portafilter and set aside.
c) With the machine OFF, press &
hold the 1 CUP button, then press
the POWER button.
d) Press the UP arrow to select ‘dESC’.
e) Press the MENU button to enter De-
scale Mode.
f) The LCD screen will leave ‘BLANK’,
the1 cup button LED will illuminate.
Do not push the 1 cup button at this
stage.
g) Empty water tank, remove water
filter then fill water tank with des-
cale solution. We advise decalci-
fying the machine on a regular basis
To Next Page
Loading...
Need help?
General
