4
www.gateway.com
Using Your Gateway Flat Panel Monitor
4 Make sure that your computer is turned off, then connect the other end of the video
cable to the matching video port on the back of your computer.
5 Connect video inputs (such as from a DVD player, video camera, or receiver) to the
appropriate video jacks on the back of the monitor.
■ For basic video quality, connect your video device’s composite video in jack to
the corresponding jack on the back of your monitor. (cable not included)
■ For better video quality, connect your video device’s S-Video jack to the
corresponding jack on the back of your monitor. (cable not included)
■ For best video quality, connect your video device’s component video (green Y,
blue Pb, and red Pr) jacks to the corresponding jacks on the back of your monitor.
(cables not included)
6 Plug the power cord into a correctly grounded electrical outlet.
S-Video jack
Component red Pr jack
Component blue Pb jack
Composite video in jack Component green Y jack
To Next Page
Loading...
Need help?
General
