www.gateway.com
5
Starting your monitor
To start your monitor:
1 Press the (power) button on the side of your monitor. The power LED in front of the power
button turns on.
2 Turn on your computer. After your computer is running, the power LED on your monitor’s
power button should be blue. Allow about 10 seconds for the display image to appear. If
the power LED is not blue or you do not see a display image, check the connections. For
more troubleshooting information, see “Troubleshooting” on page 11.
3 Adjust the tilt of your monitor for the best viewing angle.
4 Use the on-screen display (OSD) to adjust other monitor settings. For more information, see
“Adjusting monitor settings” on page 6.
Power button
To Next Page
Loading...
