Using Your Gateway Flat-Panel Monitor
4
Setting up the optional speaker bar
In the United States, an optional speaker bar is available for mounting underneath your monitor.
You can order a speaker bar from www.gateway.com
.
To install the speaker bar:
1 Turn off your monitor.
2 Tilt the screen back, then match the mounting clips on each side of the speaker bar with
the mounting slots underneath your monitor.
3 Slide the speaker bar onto the bottom of your monitor until it snaps into place. Make sure
that it is secure by pulling it downward.
4 Plug the speaker bar’s power plug into the power connector on your monitor.
Mounting slot Mounting clip
Speaker bar power connector
To Next Page
Loading...
