7
www.gateway.com
Starting the monitor
2 Turn on your computer.
3 After your computer is running, the power LED on the monitor should be green. If
not, check the connections. For more troubleshooting information, see
“Troubleshooting” on page 16.
4 Adjust the controls to get the ideal image size and position for you. For more
information, see “Adjusting monitor settings” on page 8.
Caution Do not store tapes or diskettes next to the monitor because the
monitor generates a strong magnetic field during startup. This field
can erase or damage data stored on magnetic tapes or diskettes.
To Next Page
Loading...
