Need help?Do you have a question about the gaviota MOTOR ELITE-i 45 Series and is the answer not in the manual?
Connects the motor to power, describes initial states based on transmitter presence.
Details the procedure for the motor to recognize the remote control.
Instructions for setting the motor's upper and lower limit positions.
Procedures to adjust or change programmed limit switch positions.
Steps to clear all previously set limit switch configurations.
Setting a specific intermediate position for partial motor movement.
How to recall or find a previously programmed intermediate stop.
Procedure to remove a programmed intermediate stop from the motor.
Duplicating settings from one transmitter to another.
Removing a specific transmitter from the motor's programmed list.
Clearing all transmitters currently paired with the motor.
Restoring the motor's operational memory from a previous state.
Enabling the mode requiring continuous button press for motor operation.
Disabling the mode requiring continuous button press for motor operation.
To Next Page
General
