Gazomat Inspectra - Marking and Initial Setup; Device Marking; First Starting Up

02_340_001_AJ_BE(Rev 11/05/11)
(from French version : 02_340_000_AJ_BE (Rev 11/05/11) Portable Inspectra Laser
©Copyright Gazomat 8/48
2 MARKING
The different device versions are marked with adhesive aluminium labels bearing the
following information, depending on the version:
100% gas version without Atex certification. Not for use in explosive atmospheres.
INSPECTRA

LASER
Serial no.: Year of manufacture – device no. in 3 digits
GAZOMAT
11, Rue de l’Atome
67802 Bischheim – France
100% version with Atex certification. May be used in explosive atmospheres.
INSPECTRA

LASER
GAZOMAT
11, Rue de l’Atome
67802 Bischheim – FRANCE
0080 - N° 05 ATEX 0051
Serial no. Year of manufacture – device no. in 3 digits
II2G Ex ib IIB T4
INERIS N° 05 ATEX 0051
The target gas detected by the INSPECTRA

LASER detector is stated on the label on the
side of the device.
3 FIRST STARTING UP
The Inspectra

detector is first started up by:
GAZOMAT
11 Rue de l’Atome
67802 Bischheim - France