To Next PageTo Next PageWhy is my GBC C340 Binding Machine staining paper?
If your GBC Binding Machine is staining paper during use, it's likely due to a protective lubricating film on the mechanism. Clean it by punching sheets of scrap paper until the paper comes out clean.
How to turn on GBC C340?
To get your GBC Binding Machine operating, connect it to a power source using the provided power cord. Then, turn the machine on using the ON/OFF switch located on the rear of the machine, next to the power socket.
General| Binding Type | Comb |
|---|---|
| Binding Capacity | Up to 450 sheets |
| Punching Capacity | Up to 25 sheets |
| Punching Method | Manual |
| Document Size | A4 |
| Punching Hole Diameter | 4 mm |
