Need help?Do you have a question about the GBC EAGLE 35 OS and is the answer not in the manual?
General| Temperature Control | Adjustable |
|---|---|
| Number of Rollers | 2 |
| Max. Laminating Width | 330 mm |
| Warm-up Time | 5 minutes |
| Laminating Speed | 300mm/min |
| Features | Reverse function |
| Power Requirements | 120V, 60Hz |
Precautions against physical hazards like entanglement, burns, and unstable placement.
Guidelines for safe power connection and operation to prevent electrical hazards.
Warnings against unauthorized repairs and procedures for reporting issues.
Instructions for handling shipping damage and initial setup precautions.
Explanation of the display indicators and operational buttons.
Teflon and rubber coated rollers for heating and compressing film.
Step-by-step process for installing and threading film rolls.
Procedure for joining new film rolls to existing ones without interruption.
How to set the correct film tension using the brake knob.
Method to counteract paper curl after lamination.
Guidelines for selecting optimal speed and temperature settings.
Procedure for removing jammed film from the rollers.
Procedure for clearing a jam involving the separator knife.
Procedure for cleaning the heat rollers using specific materials.
To Next Page
