Need help?Do you have a question about the GBC Ultima 35 EZload and is the answer not in the manual?
General| Type | Hot laminator |
|---|---|
| Format | A3 |
| Warm-up time | 1.5 min |
| Product color | Black |
| Laminating time | 20 s |
| Built-in display | - |
| Lamination speed | 915 mm/min |
| Maximum pouch thickness | 125 µm |
| Maximum lamination width | - mm |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 427 mm |
|---|---|
| Width | 493 mm |
| Height | 290 mm |
| Weight | 18100 g |
General operating guidelines and precautions for safe use of the laminator, including avoiding entanglement and hot surfaces.
Precautions for safe electrical connection, power cord handling, and outlet usage, emphasizing proper voltage and indoor use.
Explicit warning against attempting to service or repair the laminator, directing users to contact authorized representatives for issues.
Instructions for proper placement, surface support, power connection, and avoiding placement near heat or cold sources.
Procedure for periodic cleaning of heat shoes to remove adhesive residue using a soft cloth, with warnings against solvents.
Description of the power switch, power lamp, ready lamp, standby switch, and roller operation controls.
Details on heat shields, feed tables, feed table latches, feed table guides, heat shoes, and idler bars.
Explanation of nip rollers for compression and pull rollers for tension, along with rear slitters and fuse location.
Information on supply roll core plugs and how their color/diameter corresponds to the laminator's holder.
Step-by-step guide on turning on the laminator, setting temperature, and feeding items for lamination.
Procedure to clear jams by reversing rollers, removing the feed table, and cutting/pulling film webs.
Technical details including operating speed, dimensions, weight, voltage, power, and warm-up time.
Advice on avoiding damage to rollers, proper item insertion, preventing wrinkles, and using both film rolls.
Table listing common symptoms, possible causes, and corrective actions for laminator issues like no power or wrinkled items.
Information on the one-year warranty, coverage details, exclusions, and the process for registering the product.
To Next Page
