GBF PL960M - Page 13

LAN Search
5. Press the ‘Lan Search’ button.
6. A list of all devices in the network will appear, click on the desired
one.
7. On the ‘Add Device screen’ will appear the information from that
device.
8. insert the password (default password is ‘1234’), change the
device’s name to the desired name, and press ‘Save’. (Do not change
the GID identification).
9. Now you can see the device’s image on the ‘Home screen’. To
access it, click on its image or its identification.
QR Code Scan
5. Press the ‘QR CodeScan’ button.
6. Accept the popup message to allow the app to access your camera.
7. Using the camera, look on the QR code placed on the device.
8. On the ‘Add Device screen’ will appear the information from that
device.
9. insert the password (default password is ‘1234’), change the
device’s name to the desired name, and press ‘Save’. (Do not change
the GID identification).
10. Now you can see the device’s image on the ‘Home screen’. To
access it, click on its image or its identification.
Manually
5. Manually insert the device's GID. The identification can be
consulted looking on the GID label placed on the device
6. Enter the default password ‘1234’.
7. insert the password (default password is ‘1234’), change the
device’s name to the desired name, and press ‘Save’. (Do not change
the GID identification).
8. Now you can see the device’s image on the ‘Home screen’. To
access it, click on its image or its identification.
NOTES:
• It is possible to add an unlimited number of devices to your app.
• Each device will support up to 4 concurrent connections.