request to the app each time it is accessed).
1. In the ‘Advanced Settings screen’ click on ‘Modify Device
Password’.
2. Enter the ‘device password’ (current), then insert the ‘new
password’ and the ‘password confirmation’.
3. Press ‘Save’.
4. Exit the ‘Device’s Settings Screen’.
Note: It is a good feature for building managers. During a change of
tenants, there is only the necessity to change the device password
and offer the device’s GID and new password for the new tenant,
blocking the access to the old tenant.
Modify Unlock Password
A password is required to activate the device’s auxiliary contact
(gate opener) from the app. This step is also required to allow the
‘One-Key Unlock’ function.
1. In the ‘Advanced Settings screen’ click on ‘Modify Unlock
Password’.
2. Enter the ‘unlock password’ (current) (the default is 1111), then
insert the ‘new password’ and the ‘password confirmation’.
3. Press ‘Save’.
4. Exit the ‘Device’s Settings Screen’.
Motion Detection
The app ControlCam2 allows you to set directly a motion detector
alarm for your device. It allows monitoring your device even when
a person does not press the call button.
1. In the ‘Advanced Settings screen’ click on ‘Motion Detection’.
2. Click on the ‘On/Off’ button.
3. Press ‘Save’.
4. Exit the ‘Device’s Settings Screen’.
Set Time
To improve your experience with the device, keep its time
synchronized with your smartphone.
1. In the ‘Advanced Settings screen’ click on ‘Set Time’.
To Next Page
Loading...
