gbo HiToP 1touch - Preparing for the Transport; General Notes

8 HiToP 1touch
 gbo Medizintechnik AG Version 1.2
Pull both feet well hand-tight so that the device has a good level and does not wobble.
2.1.2 Preparing for the transport
Unscrew both feet counter-clockwise from the holes in the lower part and slide them
into the holes on the rear panel. The feet are secured against falling out during
transport by magnets. For the transport use always the designated HiToP

1touch
transport bag. In this bag enough space for all the accessories is available. Also for
the Aloe Vera contact spray a bottle holder is provided.
2.1.3 General Notes
The HiToP

1touch corresponds to the regulations of EN 60601. It is a device of
protection class I. Within the scope of the Medical Device Directive (MDD) the current
stimulation device belongs to class IIa.
Warning!
The unit is not designed to be operated in places with the inherent risk of
explosions. If it is used in dangerous areas of anesthesia departments, the