gbo HiToP 1touch - Power Connection and Device Activation

HiToP 1touch 9
 gbo Medizintechnik AG Version 1.2
possibility of an explosion cannot be excluded.
If the patient and/or the patient cable is directly exposed to a radiator of a
medical device for high frequency heat therapy, damage of the device or
danger to the patient cannot be excluded. As a rule, a clearance distance
of 3 m is sufficient.
2.2 Connection and Switch-On
The HiToP

1touch is designed to be connected to a supply voltage of 100 to 240 V. It
is not necessary to switch over the voltage – the device adjusts automatically to the right
voltage.
Irrespective of the adjusted supply voltage, the device is appropriate for mains
frequencies of 50 to 60 Hz.
Connect the HiToP

1touch with the mains cable to a socket with protective ground.
The protective ground must work correctly.
The HiToP

1touch is switched on by the main switch on the back of the device.
Warning!
To avoid the risk of electric shock, this equipment must only be
connected to supply mains with protective earth.