GCC Technologies LaserPro X500 III-100

Need help?

Do you have a question about the GCC Technologies LaserPro X500 III-100 and is the answer not in the manual?

Summary

Chapter I - Safety

1.2 Safety Ratings

Details the safety classifications of the LaserPro X500 SERIES, including Class I and Class 2 features.

1.3 The Safety Interlock System

Describes the safety interlock system, door LEDs, and emergency procedures for malfunctions.

1.4 Safety Labels

Explains the purpose and placement of CDRH-compliant laser warning labels on the machine.

1.5 Safety Measures

Provides essential safety precautions for laser operation, including radiation hazards and fire prevention.

Chapter II - Unpacking & Contents

2.1 Unloading and Unpacking

Step-by-step instructions for safely unloading and unpacking the LaserPro X500 SERIES from its shipping crate.

Chapter IV - Setup and Installation

4.1 Machine Setup

Covers initial machine setup procedures, including powering up and connecting cables.

4.1.1 Powering Up the Machine

4.1.3 Hose Connector

4.1.4 Air Compressor

4.1.5 Water Chiller Installation

Instructions for connecting and setting up the water chiller for laser tube cooling.

4.1.9 Manual Focusing Tool

4.1.10 Connecting the Computer

Methods for connecting the LaserPro X500 SERIES to a computer via USB or LAN.

4.1.10.1 Networking Connectivity Setup

4.1.10.2 Ethernet Connectivity Setup

4.2.2 Installation of the LaserPro Print Driver

Instructions for installing the LaserPro X500 SERIES print driver from the included CD.

Chapter V - Operating the LaserPro X500 SERIES

5.1 Using the Hardware

5.1.2 Laser Key Switch

Proper usage of the laser key switch for enabling or disabling the laser.

5.1.3 Graphic Control Panel Overview (Description)

Detailed description of the control panel, including indicator lights and buttons.

5.1.5 Graphic Control Panel Function Pages

5.2 The LaserPro X500 SERIES Print Driver

Overview of the print driver's role in configuring engraving and cutting parameters.

5.2.1 Page Setup and Orientation

5.2.3 Using the LaserPro X500 SERIES Print Driver

How to access and configure job details using the LaserPro X500 SERIES print driver.

5.2.3.1 LaserPro X500 SERIES Print Driver >> Option Page

Configuring mode settings like Black & White, Manual Color Fill, 3D, Stamp, and Raster.

5.2.3.2 LaserPro X500 SERIES Print Driver >> Pen Page

Setting laser power, speed, PPI, and air assist using the 16-pen color system.

5.2.3.3 X500 SERIES Print Driver >> Advance Page

5.2.3.6 LaserPro X500 SERIES Print Driver >> Raster Page

5.2.3.7 LaserPro X500 SERIES Print Driver >> Raster Page

Chapter VII - Optional Items

7.1 Fume Extraction System Option

Information on installing a fume extraction system for removing dust and chemical smoke.

7.2 SmartGUARD Fire Alarm Option

Details on the SmartGUARD fire alarm system for detecting and alerting potential fire hazards.

Chapter VIII Basic Maintenance

8.1 Suggested Cleaning and Maintenance Supplies

Lists recommended tools and supplies for cleaning and maintaining the laser engraver.

8.2 Routine Cleaning

8.3 Mirrors and lenses

8.3.1 Cleaning the mirrors

8.3.2 Cleaning the lens

Chapter IX - Basic Troubleshooting

Quality Problems

Troubleshooting steps for common quality issues encountered during operation.

Non-operational Problems

Guidance for resolving non-operational issues, such as laser beam generation problems.