EasyManua.ls Logo

gCreate gMax 2 PRO Quick Start Guide

gCreate gMax 2 PRO
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
v210819 (Marlin 2 Firmware)
gMax 2 PRO
Getting Started
Even if you are familiar with 3d prinƟng, please review this guide
to set up and learn about your gMax Printer.
This guide should be used aŌer you have received the printer and followed the
unboxing instrucƟons. This manual is for Single and Dual extruder printers
Check out youtube.com/gCreate3d
to watch a gMax 2 Geƫng Started Video

Other manuals for gCreate gMax 2 PRO

Question and Answer IconNeed help?

Do you have a question about the gCreate gMax 2 PRO and is the answer not in the manual?

gCreate gMax 2 PRO Specifications

General IconGeneral
Print SpeedUp to 150 mm/s
Filament Diameter1.75 mm
Frame MaterialAluminum
ConnectivityUSB, SD Card
Heated BedYes
Nozzle TemperatureUp to 300°C
Bed Temperatureup to 100 °C
Nozzle Diameter0.4 mm
Supported MaterialsPLA, ABS, PETG, TPU
Power Requirements110V or 220V