Installation Instructions
6
DIP switch
Phase adjust
buttons DD level
Lens
mode
switch
Figure 2. Camera controls
1)
If you are using a C-mount lens, screw on the C-mount adapter.
2)
Screw the appropriate lens to the camera.
3)
Set the lens mode switch (Figure 3) to
correspond with the lens:
• For an auto iris lens without amplifier
(DC type), set the lens mode switch
to DD.
• For an auto iris lens with built-in
amplifier (VIDEO type), set the lens
mode switch to VD.
• For a manual iris lens, set the lens
mode switch to AES.
4)
If you are using an auto iris lens,
insert the iris lens plug into the auto
iris lens connector. (See Figure 1.)
AES—manual iris lens
VD—video drive lens
DD—DC drive lens
Figure 3. Lens mode switch settings
To Next Page
Loading...