Need help?Do you have a question about the GE Security CS375 and is the answer not in the manual?
General| Zones | 8 |
|---|---|
| Hardwired Zones | 8 |
| Partitions | 1 |
| Input Voltage | 16.5 VAC |
| Wireless Zones | 0 |
| Type | Wired |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Dimensions | 10.5" H x 12.5" W x 3.5" D |
Instructions for safely connecting the system to mains power.
Guides installation of control units in different housing types.
How to access and use the installer programming menu.
Procedures for modifying various menu settings and entries.
Configuration options for different reporting modes to central stations.
Process of adding new keypads and modules to the system.
Configuring system zones, types, and names.
Setting up and configuring system outputs based on events.
Procedures for setting installer and user codes with their authorities.
Configuring how the panel communicates with central stations.
Steps for wiring and setting up 433 MHz receivers.
Steps for wiring and setting up 868 MHz receivers.
Configuring wireless modules and detectors.
Steps for wiring and setting DIP switches for the output expander.
Configuring output triggers, schedules, and user control.
Instructions for connecting the module to PC and panel.
Methods for transferring panel programming to the module.
Steps for wiring and general operation of the listen-in module.
Configuring listen-in options, timers, volumes, and X-10 devices.
Steps for wiring, DIP switches, and enrolling the power module.
Configuring outputs and features for the power module.
Configuring voice reporting, recording, and playback.
Steps for mounting and wiring the proximity reader.
Configuring badge functions, X-10, and card management.
Steps for installing the SIM card and wiring the GPRS module.
Configuring reporting, GSM settings, and upload/download.
Steps for wiring and identifying LEDs on the TCP/IP module.
Configuring TCP/IP, email, and reporting options.
Steps for mounting, wiring, and identifying LEDs on the ISDN dialler.
Configuring phone reporting, ISDN connections, and upload/download.
Instructions for connecting the panel via serial port or modem.
Using software for downloading and uploading system configuration.
To Next Page
