To Next PageTo Next Page
Need help?Do you have a question about the GE Security Simon 60-875 and is the answer not in the manual?
General| Type | Wireless Security System |
|---|---|
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Operating Humidity | Up to 85% Relative Humidity, Non-Condensing |
| Power Supply AC | 120V AC |
| Compatibility | GE Security Wireless Sensors |
Overview of the devices that make up the security system.
How to enter commands via the panel, including access codes.
Steps to disarm the security system.
Explanation of arming and disarming the system.
How to turn on intrusion/burglary protection for the system.
How to turn off intrusion/burglary protection for the system.
Steps to cancel an accidental alarm.
Best practices to avoid triggering false alarms.
Activating emergency signals from touchpads/keypads.
Step-by-step guide to accessing programming features.
Information on master and user access codes.
Steps to modify existing access codes.
Steps to remove access codes from the system.
How to temporarily stop trouble beeps.
What to do if a sensor is not communicating.
What happens during an AC power failure.
What to do if a sensor battery is low.
What happens when the backup battery fails.
What happens when the system cannot communicate.
What happens if a sensor is disturbed or not reset.
What happens if a sensor is physically tampered with.
What to do if a siren fails.
What happens if the panel cover is opened while armed.
How to clear system status messages.
How to test individual sensors for proper communication.
How to test communication with the monitoring station, pager, and phone.
Steps for preparing emergency plans and discussions.
