GE 12 Owner's Manual And Installation Instructions

INSTALL THE DOOR STOPS
Metal door stops, to be used when reversing the door
swing, were included with the refrigerator. Remove the
door stops from the right end of each door. Install the
door stops, designed for the left side, on the left end of
each door.
12
REVERSING THE DOOR SWING (CONT.)
Installation Instructions
TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT
Remove the nameplate plug button by carefully
prying under the edge with a putty knife. Remove
the exposed screw holding the handle.
7
Remove the two screws holding the handle to the
bottom of the door.
Remove the handle.
Reverse the buttons and screw on top flange of door.
Nameplate
Plug Button
Handle Top
Handle Bottom
Screws
for Handle
Holes
Plug Button
8
Attach the handle to the right side of the door,
reversing the above procedure.
Door Stop
Left Side Right Side
Shim
Shim
TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT (CONT.)
Transfer the button on door face to opposite side.
7
Plug Button

GE 12 Specifications

General

Type	Top Freezer Refrigerator
Brand	GE
Model	GE 12
Category	Refrigerator
Color	White
Door Hinge	Reversible
Capacity	12 cu ft
Shelves	2