GE 12 Owner's Manual And Installation Instructions

8
REVERSING THE DOOR SWING
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work surface for
the doors.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from
the right side to the left side—if you ever want to change
the hinges back to the right side, follow these same
instructions and reverse all references to left and right.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves.
IMPORTANT NOTES
Installation Instructions
REMOVE THE FREEZER DOOR
1
5/16″ Head socket driver 7/32″ Head socket driver
TOOLS YOU WILL NEED
Phillips screwdriver
Putty knife or
thin-blade screwdriver
NOTE: When removing the freezer door,
washer(s) between the center hinge and the door
may stick to the door. Do not lose.
CAUTION: Do not let door drop to the floor.
To do so could damage the door stop.
Tape the door shut with masking tape.
Remove the hinge cover, top hinge, shim and
two screws.
Set the door on a non-scratching surface with the
outside up.

GE 12 Specifications

General

Type	Top Freezer Refrigerator
Brand	GE
Model	GE 12
Category	Refrigerator
Color	White
Door Hinge	Reversible
Capacity	12 cu ft
Shelves	2