EasyManuals Logo

GE 12 Owner's Manual And Installation Instructions

GE 12
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Installation Instructions
REMOVE THE FRESH FOOD
DOOR
2
Tape the door shut with masking tape.
Remove the hinge pin by turning it
counterclockwise. Lift up slightly on the door
handle while pulling the pin out of the center
hinge.
CAUTION: Do not let door drop to the floor.
To do so could damage the door stop.
Remove the door by opening it slightly while lifting it
straight up and out in order to clear the center hinge
and the bottom hinge pin.
Set the door outside-up on a non-scratching surface.
Make sure the butter bin does not swing open.
Replace the washer(s) on the bottom hinge if they
stick to the door.
TRANSFER TOP HINGE TO
THE LEFT
Remove the plug buttons by carefully prying
under the edge with a putty knife. Be careful of
the paint finish.
Reinstall the plug buttons on the right side by
inserting them into the holes vacated by the top
hinge screws.
3
Be sure screws
go through
these holes
for left side.
Plug Buttons
Reassemble the top hinge and shim on the left side,
turning the screws just enough to hold the hinge in
place.

Other manuals for GE 12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE 12 and is the answer not in the manual?

GE 12 Specifications

General IconGeneral
TypeTop Freezer Refrigerator
BrandGE
ModelGE 12
CategoryRefrigerator
ColorWhite
Door HingeReversible
Capacity12 cu ft
Shelves2

Related product manuals