Using Your Mixer
To Insert Beaters
1. Make sure mixer is unplugged and
speed control is set to 0 (OFF).
2. Insert a beater into an opening on
the bottom
of the mixer.
Push until it
clicks into
place. Repeat
with other
beater.
To Insert Whisk
1. Make sure mixer is unplugged and
speed control is set to 0 (OFF).
2. Insert whisk into either opening on
the bottom
of the mixer.
Push until it
clicks into place.
4
1. Make sure mixer is unplugged and
speed control is set to 0 (OFF).
2. Insert dough hook with collar into
left-side
opening on
the bottom
of the mixer.
Push until it
clicks into
place. Repeat
with the dough
hook that
does not have a collar in the other
opening.
3. Use dough hooks with speeds 3 to 6
to knead dough. Do not knead dough
continuously for more than 5 minutes
or the mixer may overheat. Do not
knead more than one loaf at a time.
To Insert Dough Hooks (available on selected models)
To Next Page
Loading...
