3
Spray/Blast Buttons (see inset)
Adjustable Steam Switch (see inset)
Water Tank Opening
Spray Nozzle
Water Window
Temperature Control Dial
Soleplate
Power ON/Auto Shutoff Reset
Button/Light
Heel Rest
Cord Release Button
Retractable Cord
Know Your Iron
Parts and Features
1
2
3
5
6
4
5
7
6
2
Before First Use
• Steam vents should be cleaned before
first use.
• During the first use of the iron, it may
appear to smoke. This will stop and
does not indicate a defect or hazard.
• To clean steam vents before first use,
prepare iron for steam ironing, then
iron over an old cloth for a few min-
utes while letting the iron steam. Press
the Blast button several times to clean
the vents. Then follow the Self-
Cleaning instructions.
• Many irons spit or sputter during
the
first few uses with tap water.
This happens
as the steam chamber
becomes conditioned. This will
stop after a few uses.
7
8
9
9
8
11
4
10
Blast Spray
2
1
1
3
11
10
To Next Page
Loading...
