GE 169153 User Manual

4
1. Unplug iron. Turn Adjustable Steam
Switch to Dry Iron O. Set iron upright
on heel rest.
2. Using a cup, slowly pour tap water
into water tank opening until MAX
fill line has been reached. Do not fill
iron directly from the faucet.
3. Plug iron into outlet.
4. Turn
the Temperature Control Dial
to desired fabric setting in the steam
range.
5. Allow two minutes for the iron to
reach desired temperature.
To Steam Iron
6. Set Adjustable Steam Switch to the
recommended steam level. See the
“Fabric Setting Chart.”
7. To turn iron off, set Adjustable Steam
Switch to Dry Iron O. Turn the
Temperature Control Dial to OFF
( O ). Unplug iron.
8. Empty water from the iron following
directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
To Dry Iron
3. Turn Temperature Control Dial
to desired temperature. Allow two
minutes for iron to reach desired
temperature.
4. To turn iron OFF (O), turn
Temperature Control Dial to OFF
(O) and unplug iron.
1. Plug iron into outlet.
2. Turn Adjustable Steam Switch to Dry
Iron O.
Using Your Iron
840143600 Ev00 9/26/05 2:29 PM Page 4

GE 169153 Specifications

General

Soleplate Material	Stainless Steel
Water Tank Capacity	280 ml
Voltage	120V
Auto Shut-off	Yes
Non-stick Soleplate	No
Cord Length	8 feet