GE 169233 - OPERATION

11
OPERATION
Auto shut-off function
• Iftheironis not moved for a certain period of time, it will shut off automatically.
• Aftershutoff,the iron will cool and the fabric setting display (7) and color-changing
indicator (13) will flash slowly in the corresponding color. The buzzer will beep six
times.
• Tilt the iron down and back to restart the iron in the previous setting.
• Theironis equipped with a motion sensor. If the iron keeps idle for a certain amount
of time, the buzzer will beep six times to warn you of a potential danger:
Position Illustration Time Beeps
On soleplate
30 seconds 6x
On the side
30 seconds 6x
On the heel
15 minutes 6x
• Press the fabric setting button (7) to restart the iron in the previous setting.
• Memory settings are lost after turning the iron off or disconnecting from the wall
outlet.
Turning the iron off and emptying the water reservoir
• Press the fabric setting button (7), until is displayed. Disconnect the iron from
the wall outlet.
• Turnthefunction knob
(4) left to the dry ironing position (ill.
g
).
• Disconnect the iron from the wall outlet.
• Wait until the iron has cooled completely.
• Place the iron on its soleplate (14) on a flat, dry and level surface. Press the function
knob
(4) to open the fill inlet cover (2) (ill.
a
).
• Hold the iron upside down over a sink to empty the water reservoir (12).
• Storetheirononitsheel(10) in a safe place (ill.
d
).
Iron-169233-05 (GB).indd 11 1/11/10 9:59 AM