PWPAWTION
(continued)
Dimensions
Model 20
A* 66%”(1692 mm)
B 31X“(800 mm)
C 32%”(826 mm)
D 48Xfl (1227 mm)
Model 24
A* 66%”(1692 mm)
B 35%”(909 mm)
C 32fi” (826 mm)
Model 22
A* 66%”(1692 mm)
B 33X”(851 mm)
C 32X”(826 mm)
D 5WA0°(1278mm)
Model 27
A* 68%”(1748mm)
B 35%”(909 mm)
C 33%”[851 mm)
D 50%0’’’(1278mm)
\–.
D 50fi” (1283 mm)
~Bl
*Height does not include binge.
T
ml
IF
D
/1
\J //
;_/
1
~STALLATIONWQ~W~NTS
MORTANT.. .Pleaseread carefu~y
How to Connect Electricity
For personal safety, this
appliance must be
properly grounded.
The power cord of this
appliance is equipped with
a 3-prong (grounding) plug
which mates with a standard
3-prong (grounding) wall
outlet to minimize the
possibility of electric shock
hazard from this appliance.
Preferredmethod
r
Q
Q
P
p7
$L—,
A
Insureproper
groundingexists
beforeusing.
Have the wall outlet and circuit checked by a qualified electrician to
make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered, it is your
personal responsibility and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
DONOT,UNDERANYCIRCUMST~=S, CUTOR RBMOW
THE TH~D (GROUND) PRONG FROM T~ WWER CORD,
Use of Adapter Pit
Because of potential
hazards under certain
conditions, we strongly
recommend against use
of an adapter plug.
However, if you still elect
to use an adapter,where
localcodes permit, a
TE~ORARY
CONNECTION maybe
madeto a properly
grounded2-prong
wall outletbyuse of
aUL listed adapter
availableatmost local
hardwarestores.
J
Y
Tempora~ Method
u
Insurepropergroundingandfirm
connectionexistsbeforeuse.
The largerslot in the adaptermust be alignedwiththe largerslot in the
wall outletto provideproperpolarityin the connectionof the powercord.
Use of an adapter plug will increase the clearance needed for the back
of the refrigerator.
CAUTION: Attaching the adapter ground terminal to a wall outlet
cover screw does not ground the appliance unless the cover screw is
metal, and not insulated, and the wall outlet is grounded through the
house wiring. Youshould have the circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
When disconnecting the power cord from the adapter, alwayshold
theadapterin place with one hand while pulling the power cord plug
with the other hand. If this is not done, the adapter ground terminal is
very likely to break with repeated use.
Should the adapter ground terminal break, DO NOT USE tie
appliance until a proper ground has again been established.
Electrical Requirements
Use of Extension Cords
The refrigerator should always be plugged into its own individual
Because of potential safety hazards under certain conditions, we
electrical oufletwhichhas a voltagerating that matches therating plate.
strongly recommend against the use of an extension cord. However, if
~Is providesthe best performanceand also prevents overloadinghouse
you still elect to use an extension cord, it is absolutely necessary that it
wiring circuits which could cause a fire hazard from overheated wires.
be a UL-listed 3-wire grounding type appliance extension cord having
16
a grounding type plug and outlet and that the electrical rating of the
cord be 15amperes (minimum) and 120volts.
To Next Page
Loading...
Need help?
General
