About the shelves and bins.
AdJustable Bins on the Door
Adjustable bins can easily be carried from
refrigerator to work area.
Toremove: Lift bin straight up, then
pull out.
Toreplace or relocate: Slidein the binjust
above the molded door supports, and push
down. The bin will lock in place.
Thesnugger helps prevent tipping, spilling
or slidingof small items stored on the door
shelf.Grip the finger hold near the rear of the
snugger and move itto fit your needs.
Non-AdJustable Bins on the Door
Toremove: Lift the bin straight up,then
pull out.
Toreplace: Engagethe bin in the molded
supports on the door and push down.
It will lock in place.
AdJustable Divider in Freezer Basket
Thefreezer basket has a divider that can be
both repositioned or removed.
Toremove: Pullthe divider forward until the
rear locating tabs are out of the slots.Turn
the divider slightlyto the side to release the
front locating tabs and lift out.
Toreplace: Turn the divider slightly to one
sideso the tabs on the front fit into the vent
slotson the basket. Positionthe divider so
the back locating tabs snap into place in the
back vent slots.
Toreposition: Removethe divider.Slidethe
divider left or right to the desired location and
replace asinstructed above.
Optional Freezer Caddy
Theoptional freezer caddy fits over the front
edge of the bottom freezer basketand can
be removed or added as needed.
Toremove: Lift the freezer caddy up.
Toreplace: Lower the freezer Caddy ensuring
the hook fits over the front edge of the
bottom freezer basket. Pushdown to secure.
About the additional features.
Not all features are on all models.
Non-AdJustable Beverage Rack
Toremove: Lift the rack straight up,then pull
out.
Toreplace: Engagethe rack in the molded
supports on the door and push down.
It will lock in place.
9
To Next Page
Loading...
Need help?
General
