GE 22 Owner's Manual

6
Customer Service Troubleshooting Tips
Operating Instructions
Safety Instructions
Installation Instructions
Customer Service Troubleshooting Tips
Installation Instructions
Safety Instructions
Operating Instructions
Customer Service Troubleshooting Tips
Installation Instructions
Safety Instructions
Operating Instructions
About the controls on the refrigerator.
The Electronic Monitor and Diagnostic System controls dispenser functions and monitors the operation of
your refrigerator.
On some models. The controls will look like one of the following.
DOOR
OPEN
WARM
TEMP
NORMAL
POWER
DEFROST
FREEZER
ICE MAKER
SYSTEM
CHECK
RESET
DISPLAY
DOOR ALARM
ON/ OFF
CUBED
ICE
CRUSHED
ICE
CHILLED
WATER
DISPENSER PUSH BELOW
Monitor and Diagnostic System
NORMAL lights up to indicate that no failure has been detected by the diagnostic system.
DOOR OPEN flashes when either door is open.
WARMTEMP lights up when freezer food-keeping temperature is above normal.
Flashing diagnostic codes. What these codes mean—and what to do when they appear—is explained
more thoroughly on the following pages.
SYSTEM CHECK-RESET reviews the diagnosis of four coded functions and allows you to erase codes
from the display.
Select CUBED ICE , CRUSHED ICE or WATER and the signal light confirms your choice.
DOOR ALARM lights up when the beeper has been set to sound after either door has been open 30
seconds.

GE 22 Specifications

General

Brand	GE
Category	Refrigerator
Energy Star Certified	Yes
Door Swing	Reversible
Crisper Drawers	2
Type	Top Freezer
Defrost Type	Frost Free