23
Installation Instructions
ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
Pull out the rail assemblies to the full length
on each side of the cabinet.
Locate the slots on the inside of the rail
assemblies near the back.
Insert the hooks at the back of the drawer
railings into the slots on the rail assemblies.
Lower the front of the drawer, making sure the
tabs on the sides of the railings fit into the front
slots in the rail assemblies.
1
A
B
D
C
REPLACE THE FREEZER BASKET
Replace the lower freezer basket by lowering it
into the frame.
2
Two people may be required to complete
this procedure.
ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
(cont.)
Replace the screws on both rail assemblies.
1
Rail assembly
Slot
E
Screw
Slot
Tab
Hook
To Next Page
Loading...
Need help?
General
