GE 22 User Manual

12
49-60647-5
Not all features are on all models.
Refrigerator Door Bins and Freeer Door Tilt-Out Bins
Bins
bins are adjustable.
To remove Lift the front of the bin straight up, then lift
up and out.
To replace or relocate Engage the back side of the bin
in the molded supports of the door. Then push down on
the front of the bin. Bin will lock in place.
The snugger helps prevent tipping, spilling or sliding of
small items stored on the door shelf. Place a finger on
either side of the snugger near the rear and move it back
and forth to fit your needs.
NOTE Be careful when placing items in the top bin.
Make sure that items do not block or fall into the ice chute.
NOTE Part must be in place as shown for proper ice
Shelves and Bins
Refrigerator bin
Snugger
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you to reach items
stored behind others. The special edges are designed to
help prevent spills from dripping to lower shelves.
To remove Slide the shelf out
until it reaches the stop, then
press down on the tab and
slide the shelf straight out.
To replace or relocate Line the shelf up with the
supports and slide it into place. The shelf can be
repositioned when the door is at 90 or more. To
reposition the shelf, slide the shelf past the stops
and angle downward. Slide shelf down to the desired
position, line up with the
supports and slide into place.
Make sure you push the
shelves all the way back in
before you close the door.
Press tab and pull shelf
forward to remove
QuickSpace™ Shelf
(on some models)
This shelf splits in half and slides under itself for storage
of tall items on the shelf below.
This shelf can be removed and replaced or relocated just
like Slide-Out Spillproof Shelves.
On some models, this shelf can not be used in the
lowest position.
(on some models)
Top freeer bins

GE 22 Specifications

General

Brand	GE
Category	Refrigerator
Energy Star Certified	Yes
Door Swing	Reversible
Crisper Drawers	2
Type	Top Freezer
Defrost Type	Frost Free