To Next Page

To Previous Page

This flashing code tells you to check your frozen food.

Has any of it started to thaw? A package may be holding

the freezer compartment door open. Don’t open the

door more often than absolutely necessary while this

code is displayed. Touching the

SYSTEM CHECK-RESET

pad after the freezer compartment temperature has

returned to normal will erase the code.

This flashing code tells you the power to the refrigerator

has been interrupted for more than two seconds. Check

the condition of food in both the fresh food and freezer

compartments. Touch the

SYSTEM CHECK-RESET

pad

to erase the code.

There is no fault with the refrigerator when the

code

flashes.

This flashing code tells you to check the automatic

icemaker. Ice clumps in the storage bin may have stalled

the icemaker. Follow corrective measures described in

Troubleshooting Tips.

If water supply to the icemaker is not

connected or not turned on, make sure the icemaker

feeler arm is in the

STOP

(up) position. Code stops

flashing when problem is corrected or

SYSTEM CHECK-

RESET

pad is touched.

This flashing code tells you something is wrong with the

defrost system—keep doors closed to retain cold and call

for service. Code flashes until problem is corrected.

Troubleshooting TipsInstallation Instructions Customer ServiceOperating InstructionsSafety Information

DISPLAY

GE 24 Owner's Manual

Other manuals for GE 24