30
NO DATA No Caller ID information was received with the call.
EMPTY Indicates a memory location is vacant.
NO CALLS Indicates no calls have been received.
CALL WAITING Indicates a call is waiting on the line.
ANSWERER Indicates the answering system is being
REMOTE ACCESS accessed remotely.
ANSWERING SYSTEM DISPLAY MESSAGES
The following messages show the status of the answering system or help
you set up and use the system.
0-59 Indicates the total number of messages.
CL (blinking) The voice time/day stamp needs to be set.
- - Answering system is turned off.
An (blinking) The system is answering a call.
F (blinking) Answering system memory is full.
Six bars (blinking) The system is recording a memo or
an announcement.
LA (Line Access) External line remote answering system.
TROUBLESHOOTING TIPS
CORDLESS PHONE SOLUTIONS
No dial tone
• Check or repeat installation steps:
Make sure the base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the
wall jack.
• Connect another phone to the same wall jack; if it doesn’t work, the
problem might be your wiring or local service.
To Next Page
Loading...
