12
Remote does not operate your device.
• Press the device button of the device you
wish to control.
• Program the remote with a new code.
• Install new batteries. (You might have to
reprogram your remote after installing
new batteries.)
• Remote may not be compatible with your device.
Remote does not operate some features of
your device.
• Sometimes a particular code might operate some
features but not all. Try programing remote with a
new code.
• Remote may not be able to operate all features of
your device or button names might be different
than that of your original remote.
Red Indicator blinks and stays on after you
program a product code.
• Remote did not accept the code.
• Try to program the code again or try a
different code.
Remote Code is not available for a combo device
(e.g. TV/VCR)
• See section for controlling combo devices.
If you have any questions or would like
additional information, please visit our web site
www.jascoproducts.com, or contact our
Technical Support Group at 1-800-654-8483.
Troubleshooting
To Next Page
Loading...
