4–4 350 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
A1 STATUS CHAPTER 4: ACTUAL VALUES
C. INPUTS SUMMARY
The display shows a summary of the states of all contact inputs.
Output relays summary
PATH: ACTUAL VALUES > A1 STATUS > OUT RELAYS SUMMARY
OUTPUT RELAYS SUMMARY
This display shows a summary of the states of all output relays.
NOTE:
Output relay #7 is the Critical Failure relay, used to indicate the correct functioning of the
350 relay. This output relay shows the status "ON" when the 350 relay is powered up and
set to "Ready" and no self-test alarms are active, under
SETPOINTS > S1 RELAY SETUP > S1
INSTALLATION > RELAY STATUS.
Logic elements summary
PATH: ACTUAL VALUES > A1 STATUS > LOGIC ELEM SUMMARY
LOGIC ELEM SUMMARY
This display shows a summary of the states of all logic elements.
GOOSE status
PATH: ACTUAL VALUES > A1 STATUS > GOOSE STATUS
GOOSE 1 TO 8 STATUS
Range: OFF, ON
Default: OFF
52a OFF CI#6 OFF
52b OFF CI#7 OFF
CI#3 OFF CI#8 OFF
CI#4 OFF CI#9 OFF
CI#5 OFF CI#10 OFF
TRIP OFF RLY#5 OFF
CLOSE OFF RLY#6 OFF
RLY#3 OFF RLY#7 ON
RLY#4 OFF
LE#1 OFF LE#9 OFF
LE#2 OFF LE#10 OFF
LE#3 OFF LE#11 OFF
LE#4 OFF LE#12 OFF
LE#5 OFF LE#13 OFF
LE#6 OFF LE#14 OFF
LE#7 OFF LE#15 OFF
LE#8 OFF LE#16 OFF
To Next Page
Loading...
