GE 94906 User Manual

Programming For TV
1. Manually turn on the TV.
2. Press and hold the
SETUP button until
the INDICATOR LIGHT
lights, then release
the SETUP button.
3. Press and release the
TV button (the
INDICATOR LIGHT
will blink then
remain lit).
4. Find the three digit
code for your TV in
the TV code list, and
enter it using the
Number Buttons.
After your code is
entered, the
INDICATOR LIGHT
will turn off.
5. Aim the remote at your
TV and press the
ON•OFF button. Your
TV should turn off.
Note: If your TV does not
respond, try all the codes
for your brand. If the codes
do not work, or your brand
is not listed, try the Code
Search method on page 7.
6. With your TV on, press
CH+. If the TV responds,
no further program-
ming is required.
7. Enter your code here
for easy reference.
BLINK
INDICATOR
LIGHT
TV CODE
OFF
SETUP
4
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 5

GE 94906 Specifications

General

Brand	GE
Model	94906
Category	Remote Control
Language	English