GE AJCQ08AC - Page 5

GEAppliances.com
COOL MODE
RemoteControl
1.PressCOOLpad.
2.PressLOW,t4EDor HIGHpadsto setdesiredfan
speed.
3.Pressthe INCREASE+ / DECREASE-pads to set
the desired temperature 60°Fto 85°Fin I°F
increments.
ControlPanel
1.Pressthet4OOEpad untilthe COOLindicatorlightislit
andthe LOW,t4EDor HIGHindicatorlightislitforthe
desiredfan speed.
2.Pressthe INCREASE+ / DECREASE- pads to set the
desired temperature 60°Fto 85°Fin I°F increments.
Athermostatisusedto maintaintheroomtemperature.
Thecompressorwillcycleonand offto keepthe room
atthe setlevelof comfort.Setthe thermostatat a lower
numberandthe indoorairwillbecomecooler.
Setthethermostatat a highernumberandthe indoorair
willbecomewarmer.
NOTE:If theairconditionerisoffondisthenturnedon
whilesetto COOL,itwill takeapproximately3minutes
forthecompressorto startandcoolingto begin.
CoolingDescriptions
ForNormalCooling-SelecttheCOOLmodeand HIGH
or triEDfanwitha middlesettemperature.
ForMaximumCooling-Selectthe COOLmode
andHIGHfan witha lowersettemperature.
ForQuieterandNighttime Cooling-Selectthe COOL
modeandLOWfanwitha middlesettemperature.
NOTE:If you switch from a COOLsettingtoOFFor to
a fansetting,wait at least3 minutesbeforeswitching
backto a COOLsetting.
FAN MODE
UsetheFANmodeto provideaircirculationandfiltering
withoutcooling.Sincefan-onlysettingsdonot provide
cooling,atemperaturesettingwill not bedisplayed.
RemoteControl
PressFANpad.PressLOW,t4EOorHIGHpadsto set
desiredfan speed.
ControlPanel
PresstheHODEpaduntilthe FANindicatorlightislit
andthe LOW,t4EDorHIGHindicatorlight islitforthe
desiredfan speed.
5