Trim kits and decorator panels. GEApplia.cescom
For panel-required models
Read these instructions completely and carefully.
Before You Begin
Some models are equipped with trim kits that allow you to install door panels. You can order
pre-cut black or white decorator panels from GE Parts and Accessories, 800.626.2002, or you
can add wood panels to match your kitchen cabinets.
Panels less than 1/4" (6 mm) thick
When installing wood panels lessthan !/4" (6mm) thick, you need to create a filler panel,such as !/8"
cardboard, that will fit between the face of the door and the wood panel. Ifyou are installing the pre-cut
decorator panels, pre-cut filler panelsare included in the kit.Thecombined thickness of the decorator or wood
panel and the filler panel should be !!/32" (8.7mm) with the panel itselfbeing no larger than !/4" (6mm).
Panels 1/4" thick or less
Thehandle and the top and bottom trim stand in front ofthe surface of the door,which requiresthat the filler
be smaller in length and width than the panel.Usethe guidelines below and tape the filler onto the back of the
Left FreshFood Door Right FreshFood Door
panel.
Filler_ Filler-
16
t
Filler_
Panel- ]_
FreezerDoor
L
Panel_ --]_
To Next Page
Loading...
