Installation Instructions
[] ATTACH THE FRESHFOOD
DOOR HANDLE
Stainless steel handle:
@ Attach the handle
to the handle
mounting fasteners
and tighten the set
screwswith a 3/32"
Allenwrench.
NOTE:For Double
Door modelsfollow
the same procedure
on the opposite
door.
Plastic handle:
(appearance may vary)
@ Attach the handle to the handle mounting fasteners
by aligning the slotswith the handle mounting
fasteners.
@ Slideit down until it is firmly locked into position.
Slots on back of
handle
(appearance may vary)
[] ATTACH THE FREEZERDOOR HANDLE
Stainlesssteel and plastic handles: (apperancemayvary)
@ Attach the handle firmly to the mounting fasteners
and tighten the set screws on the bottom of the
handle with a 1/8" or 3/32" Allenwrench.
(appearance may vary)
(appearance may vary)
24
To Next Page
Loading...
