About the controls with temperature settin s.
Control style A, Internal Controls (on some models)
(FIGA)
(FIGB)
Control styles A, B & D (onsomemodels)
r_q
r_q
_" ENERGY SAVER ON
Control style C, LCD External Controls (on some models)
...... .....
1===1 _ €==,
r_
Control style D, External Controls (on some models)
NOTE:The refrigermtor isshipped with protective film covering the temperature controls.
If this film wos not removed during installution, remove it now.
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for
the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SETtemperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary slightly from the SETtemperature based on
usage and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments,
but does not shut off electrical power to the refrigerator.
4