GE b30 - Page 291

CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
UR FAMILY – COMMUNICATIONS GUIDE 3-53
3
3.5.2.21 Directional comparison blocking (DCB3)
This element is instantiated in the following products: F60.
Table 3-42: DCB3 data objects
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef09 ORG BLK1 SCHME DIR REV1 setting. R
setSrcRef ObjectReference SP BLK1 SCHME DIR REV1 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef10 ORG BLK1 SCHME DIR REV2 setting. R
setSrcRef ObjectReference SP BLK1 SCHME DIR REV2 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef11 ORG BLK1 SCHME DIR REV3 setting. R
setSrcRef ObjectReference SP BLK1 SCHME DIR REV3 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef12 ORG BLK1 FORCE TX STOP1 setting. R
setSrcRef ObjectReference SP BLK1 FORCE TX STOP1 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef13 ORG BLK1 FORCE TX STOP2 setting. R
setSrcRef ObjectReference SP BLK1 FORCE TX STOP2 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef01 ORG BLOCK1 SCHEME RX1 setting. R
setSrcRef ObjectReference SP BLOCK1 SCHEME RX1 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef02 ORG Instantiated only on products with single
pole tripping.
R
setSrcRef ObjectReference SP BLOCK1 SCHEME RX2 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef03 ORG Instantiated only on products with single
pole tripping.
R
setSrcRef ObjectReference SP BLOCK1 SCHEME RX3 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef04 ORG Instantiated only on products with single
pole tripping.
R
setSrcRef ObjectReference SP BLOCK1 SCHEME RX4 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: DCB3_PSCH1 LDevice inst: Prot UR element: Directional Comparison Blocking3 element
data obj. data attribute Type FC UR Name Description R/W/C
Op ACT DCB3 OP operand R
general BOOLEAN ST DCB3 OP R
TxBlk ACT DCB3 TX INIT operand R
general BOOLEAN ST DCB3 TX INIT R
TxStop SPS DCB3 TX STOP operand R
stVal BOOLEAN ST DCB3 TX STOP R
BlkRef1 ORG DCB3 SCHEME BLOCK setting. R
setSrcRef ObjectReference SP DCB3 SCHEME BLOCK. reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef01 ORG DCB3 SCHME DIR FWD1 setting. R
setSrcRef ObjectReference SP DCB3 SCHME DIR FWD1 reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef02 ORG DCB3 SCHME DIR FWD2 setting. R
setSrcRef ObjectReference SP DCB3 SCHME DIR FWD2 reference to the data attribute to input R/C
LNName: DCB1_PSCH1 LDevice inst: Prot UR element: Directional Comparison Blocking1 element
data obj. data attribute Type FC UR Name Description R/W/C