Need help?Do you have a question about the GE CARESCAPE R860 and is the answer not in the manual?
Steps to set up the single-limb breathing circuit for O2 therapy.
Steps to set up the dual-limb breathing circuit for O2 therapy.
Steps for performing a system check with a dual-limb circuit.
Steps for performing a system check with a single-limb circuit.
Explanation of the circuit pressure bar graph and its meaning.
Steps to set up the single-limb breathing circuit for O2 therapy.
Steps to set up the dual-limb breathing circuit for O2 therapy.
Steps for performing a system check with a dual-limb circuit.
Steps for performing a system check with a single-limb circuit.
Explanation of the circuit pressure bar graph and its meaning.
General| Manufacturer | GE Healthcare |
|---|---|
| Model | CARESCAPE R860 |
| Patient Type | Adult, Pediatric, Neonatal |
| Ventilation Modes | Volume Control, Pressure Control, SIMV, CPAP |
| Respiratory Rate | 1 - 150 breaths per minute |
| FiO2 Range | 21% to 100% |
| Inspiratory Time | 0.1 - 10 seconds |
| Connectivity | Ethernet, Serial |
| Power Source | Internal Battery |
| Weight | 35 lbs (without cart) |
| Type | Critical Care Ventilator |
To Next Page
