EasyManua.ls Logo

GE DISPOSALL GFC320N - User Manual

GE DISPOSALL GFC320N
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Write the model and serial
numbers here:
Model # _________________
Serial # _________________
You can find them on a label on
the bottom of the disposer.
GE is a trademark of the General Electric Company. Manufactured under trademark license.
OWNER’S MANUAL
AND INSTALLATION
INSTRUCTIONS
DISPOSALL
®
49-5903-3 12-18 GEA
ENGLISH/FRANÇAIS/
ESPAÑOL
SAFETY INFORMATION ..........3
USING THE DISPOSER
Continuous Feed Models ................5
Batch Feed Models .....................5
CARE AND CLEANING .............6
INSTALLATION INSTRUCTIONS
Preparation ...........................7
Components and Installation ............8
Installation of Sink Flange ..............8
Dishwasher Connection .................9
Attach the Discharge Elbow .............9
Connect Disposer to Sink Flange .......10
Dimensions .......................... 11
Some Typical Installations ............. 11
TROUBLESHOOTING ............12
LIMITED WARRANTY ...........15
CONSUMER SUPPORT ..........16
Food Waste Disposer
GFC320N
GFC325N
GFC520N
GFC525N
GFC530N
GFC535N
GFC720N
GFB760N
GFC1020N

Table of Contents

Questions and Answers

  • A
    Anna WileyAug 4, 2025
    What to do if my GE DISPOSALL GFC320N doesn't start?
    • K
      Kevin CollinsAug 4, 2025
      First, with the splash guard removed, check if the turntable moves freely using a broom handle. If it does, replace the splash guard and check the red reset button, located opposite the discharge elbow near the bottom of the disposer, to see if it has been tripped. Push the button in until it clicks and remains depressed. If the reset button hasn't tripped, check for shorted or broken wires connected to the disposer, and inspect the electrical power switch, fuse box, or circuit breaker. If wiring and electrical components are intact, the unit may have internal problems requiring service or replacement.
  • J
    Jasmine WoodardAug 12, 2025
    How to fix loud noises from GE DISPOSALL GFC320N?
    • M
      Michele SullivanAug 12, 2025
      To address loud noises (other than those during grinding of bones and fruit pits) in your GE Garbage Disposal, remove the splash guard and use long-handled tongs to remove any foreign objects. Then, replace the splash guard.
  • C
    Christy MccarthyAug 19, 2025
    What to do if GE DISPOSALL GFC320N turntable cannot rotate?
    • K
      kyle23Aug 19, 2025
      If the turntable doesn't turn freely, check for any object lodged between the turntable and the grinding ring. Dislodge the object by moving the turntable with a broom handle and then remove it. If no foreign object is present, there may be internal problems.
  • C
    Crystal MorenoAug 27, 2025
    Why is my GE DISPOSALL GFC320N leaking?
    • S
      Sherry HallAug 27, 2025
      If the leak is at the top, it could be due to improper seating of the sink flange (gasket choice, putty, or tightening), the support ring not being tightened properly, or a defective cushion mount. If the leak is at the discharge elbow, it may be caused by improper tightening of the elbow flange screws.

Summary

Important Safety Information

Safety Precautions

Basic safety precautions to follow when using electrical appliances to minimize risks.

Connecting Electricity

Instructions for connecting the disposer to electrical power, emphasizing grounding.

Using the Disposer

Continuous Feed Models

Instructions for using continuous feed model food waste disposers.

Batch Feed Models

Instructions for using batch feed model food waste disposers.

Installation Instructions

Before You Begin

Preparation

Steps to prepare the installation site and remove old components.

Components and Installation

Details of disposer components and step-by-step installation procedures.

Dishwasher Connection

Attach the Discharge Elbow

Connect Disposer to Sink Flange

Procedure for attaching and securing the disposer to the sink flange assembly.

Troubleshooting Tips

GE DISPOSALL GFC320N Specifications

General IconGeneral
Feed TypeContinuous
Grinding Chamber MaterialStainless Steel
Weight10.5 lbs
Sound InsulationYes
Motor Speed1725 RPM
Grind Stages1
Anti-Jamming FeatureYes
Mounting Hardware IncludedYes
Warranty2 years

Related product manuals