Need help?Do you have a question about the GE DPGT750EC/GC and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | DPGT750EC/GC |
| Type | Dryer |
| Venting | Yes |
| Ventless | No |
| Number of Cycles | 12 |
| Control Type | Electronic |
| Wrinkle Care Option | Yes |
| Moisture Sensor | Yes |
Details how to interpret the serial number for manufacture date.
Lists items and situations not covered by the warranty.
Introduces the dryer's advanced technology and features.
Explains the layout and purpose of each button on the control panel.
Step-by-step instructions for the initial operation of the dryer.
Explains how the dryer interacts with a compatible washer for cycle selection.
Explains how to select cycles based on fabric material.
Explains how to select cycles based on clothing type.
Details the usage of special cycles like Air Dry or Rack Dry.
Instructions for manually setting drying time and temperature.
Overview of the information presented on the Summary Screen.
How to adjust the desired level of dryness for a cycle.
How to adjust the drying temperature for a cycle.
Details on selecting drying options like delay start and extended tumble.
Procedures for modifying cycle time, delay start, and extended tumble.
Explains the screen showing the current cycle status and time remaining.
Introduces the functionality of the custom cycles feature.
Detailed steps for creating and utilizing personalized drying cycles.
Procedures for editing, renaming, or removing saved custom cycles.
Overview of the help system and how to access it.
Steps to use the built-in troubleshooter for common dryer issues.
How to get assistance with features directly from the Home Screen.
Details on enabling or disabling communication between washer and dryer.
How to control the audible signal indicating cycle completion.
Illustrates the path of air through the dryer.
Details temperature settings, amperage draw, and wattage for different modes.
Identifies the location of various internal components in the electric model.
Identifies the location of various internal components in the gas model.
Details pin connectors for the inverter board on electric models.
Details pin connectors for the inverter board on gas models.
Explains jumper settings for natural vs. LP gas configurations.
Instructions for removing the backsplash to access internal components.
How to remove the main control board and LCD touch screen assembly.
Lists the main components of the dryer's control system.
Procedure for testing the continuity of the membrane keypanel.
Explains the beeper's function and how to test its associated circuit.
Detailed steps for disassembling and removing the dryer drum.
Step-by-step guide for removing the drum roller assemblies.
Instructions for properly installing the dryer's drive belt.
Steps for removing the belt switch from the motor bracket.
Detailed steps for safely removing the drive motor.
Instructions for removing the blower motor assembly.
Step-by-step guide for safely removing the heater assembly.
Instructions for removing the inlet thermistor.
Instructions for removing the outlet thermistor.
Instructions for removing the outlet thermostat.
Steps for removing the hi-limit thermostat.
Instructions for removing the gas valve assembly.
Steps for removing the ignitor from the combustion chamber.
Procedure for testing the ignitor and flame detector circuit in test mode.
Procedure for testing the moisture sensor circuit in factory test mode.
Explains the purpose and benefits of the field service mode.
Step-by-step guide to entering the dryer's service mode.
Explains test results (OK/NG) and specific test parameters.
Covers backlight issues, lines on screen, and brightness adjustments.
Addresses incorrect activation and checkerboard patterns on the interface.
Information on removing scuff marks from plastic surfaces.
Covers causes and solutions for slow drying and heating failures.
Details errors related to memory, inlet/outlet thermistors, moisture sensor, and heater.
Covers errors related to keypanel, touchscreen, washer/dryer connection, and door switch.
Addresses errors related to airflow, ignition, model connectors, and gas setup.
Electrical diagram for the electric model dryer.
Electrical diagram for the gas model dryer.
Visual diagrams showing the assembly of electric model dryer components.
Detailed catalog of parts for the electric model dryer with part numbers.
Visual diagrams showing the assembly of gas model dryer components.
Detailed catalog of parts for the gas model dryer with part numbers.
Explains the purpose of reversing the door swing for installation flexibility.
Detailed instructions for reversing the dryer door swing.
Explains why and when to switch dryer and washer backsplashes.
Step-by-step guide to swapping the backsplashes.
To Next Page
