48 49
Image Stabilization mode
The stabilizer function is used for less blur picture
caused by hand shake under a dark environment, the
camera would increase the ISO level under the mode to
have a higher shutter speed.
This function may not help to take a clear picture
of a fast moving target, such as a car passing by,
etc.
This function may not help to stabilize photos if
you are in a moving vehicle (car, boat, etc.). It is
best used when taking normal shots.
The Image Stabilization mode combats the eect of
hand shake and allows you to take pictures that would
otherwise be blurred.
1. Switch the mode dial to ( ) mode.
2. Press
Shutter
halfway to focus on the subject.
3. Press
Shutter
fully to capture the image.
To Next Page
Loading...
Need help?
General
