GE E1055W - Copy to Card (Copy internal memory to memory card); Reset Settings

74 7575
3. The current media is formatted.
Beep
Use this setting to adjust the volume of beep when
buttons are pressed and change the tones for shutter,
buttons, self-timer, and power-on/power-o.
To change this setting:
1. Select the
Beep setting from the Setup menu as
described previously.
2. Use the
Up/Down navigation buttons to switch
between volume, shutter tone, key tone, self-timer
tone, and power tone elds.
3. Use the Left/Right navigation buttons to adjust
the volume and change each tone style. Then press
the button to conrm.
LCD Brightness
Use this setting to adjust the brightness of your LCD
screen.
1. Select the
LCD Brightness setting from the
Setup menu as described previously.
2. Use the
Up/Down buttons to select to Auto or
Manual brightness adjustment, and then press
to conrm your election.