08/24/2016
6. Edition, ID No.: 37020GB-F
Operating Manual ERESCO MF4 Type Series
Copyright by GE Sensing & Inspection Technologies GmbH Bogenstrasse 41 D - 22926 Ahrensburg
6. Edition
Documentation ID No.: 37020GB-F (1540745/EB.0808)
Changes and improvements compared to the previous edition:
- Exchange of Fig. 5 – Chapter 2 Installation,
- Exchange of Fig. 7 – Chapter 6 Fuses and pin assignment and values corrected
- Addition of ERESCO 300MF4-R
- Addition of Global Tech Support
Published by GE Sensing & Inspection Technologies GmbH,
Reference: hi/er/gu Date: 08/24/2016 File: 37020GB-F Betriebsanleitung_ErescoMF4.indd
Printed in Germany 2016
GE Sensing & Inspection Technologies GmbH reserves the right to technical modications without prior notice.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of
GE Sensing & Inspection Technologies GmbH.
Adress GE Sensing & Inspection Technologies GmbH
Bogenstraße 41
22926 Ahrensburg
Germany
Service-Hotline +49 (0) 4102 807 117
Telefax +49 (0) 4102 807 277
E-mail xray.service-ahr@ge.com
Internet www.ge-mcs.com
Global Tech Support #1-866-243-2638
To Next Page
Loading...
